DOMINATOR Racing Grease is engineered with extreme-pressure additives to deliver excellent wear protection in heavily loaded, high-speed racing applications. Its high-performance anti-wear additive package helps ensure long component life.
Because it effectively reduces friction, DOMINATOR Racing Grease not only inhibits wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.
Although DOMINATOR Racing Grease is specially formulated for high-temperature/high-speed applications, it also delivers superior protection for low-speed bearings, providing racing components with the exceptional load-bearing capacity of a heavy-duty grease.
DOMINATOR Racing Grease pairs a high-viscosity-index synthetic base oil with a top-quality lithium complex thickener known for its extraordinary performance in temperature extremes. It offers excellent low-temperature pumpability and high-temperature consistency for dependable protection in all temperatures.
Resists Oxidation, Corrosion & Washout
DOMINATOR Racing Grease contains a robust package of oxidation inhibitors, helping prevent grease breakdown and component surface damage. Its excellent adhesion and cohesion properties allow it to resist water washout during operation in wet conditions. A premium blend of corrosion inhibitors further protects against rust and corrosion formation.
|Typical Technical Properties|
|AMSOIL Synthetic Lithium Complex Racing Grease||DOMINATOR Synthetic Racing Grease||NLGI GC-LB|
|NLGI Consistency Grade||2 EP||NR*|
|NLGI Performance Grade||GC-LB||NR*|
|Penetration (ASTM D 217) 25° C [77° F], 0.1 mm Worked 60 strokes||265-295||220 – 340|
|Dropping Point (ASTM D 566) °C [77° F]||288 (550)||220 (428)|
|High Temperature Life (ASTM D 3527) hours||100||80 min|
|Water Washout (ASTM D 1264) 79° C [175° F] % loss||5.0||15 max|
|Water Spray Off (ASTM D 4049), % max||18.0||NR*|
|Rust and Corrosion (ASTM D 1743)||pass||pass|
|Oil Separation (ASTM D 1742) 24 hr. @ 25° C [77° F], % loss||2.8||10 max|
|Leakage (ASTM D 4290), g*||5.0||10 max|
|Four-Ball Wear Test , mm scar (ASTM D 2266)||0.52||0.9 max|
|Four-Ball EP, kgf (ASTM D 2596)
Load Wear Index
|Timken OK Load Test (ASTM D 2509), lbs.||60||NR*|
|Fretting Wear (ASTM D 4170) mg*||8.5||10 max|
|Low Temperature Torque (ASTM D 4693) n·m, max @ -40° C [-40° F]||7.2||15.5|
|Fortified with Moly Compound||No||NR*|
|Compatibility with other greases||Excellent||NR*|
|Elastomer Compatibility (ASTM D 4289)
Volume Change, %, GC
Volume Change, %, LB
Hardness Change, durometer-A points, GC
Hardness Change, durometer-A points, LB
|-5 to +30
0 to +30
+2 to -15
0 to -10
|* NR: Not Required for NLGI GC or LB labeling|